Clear Vision/
>
1. When there is no OSD, Press the “ ” button to activate
Clear Vision
2. Use the “ ” or “ “buttons to select between weak,
medium, strong,
or off settings.
Default setting is
always “off”
3.
Clear Vision function will provides the best image
viewing
experience by converting low
resolution and
blurry images
into
clear and vivid images.
>
>
>
Press and hold “ < ” button for 5 seconds ,the vertical line
will display while no vertical line
in screen;
Press and hold
“
<
”
button
for
5 seconds ,the vertical line will disappear while
the
vertical
line
is
moving
in
screen;
Press
the
“<”
Button
to
turn
the
monitor
clear
vision
Off /
Strong / Medium / Weak,
the
left
of
vertical
line
will
be
the
effect
demo
and
right
of
vertical line
will
be
clear vision off
;
When display picture in screen will be
more obviously.
To Next Page
Loading...
Need help?
General
