25
Using Component Video
Connecting your DVD Player (Better)
1. Turn off the power to the HDTV and DVD player.
2. Connect the Pr (red color) connector on your DVD player to the
corresponding Pr (red color) connector in the Component at the rear of the
HDTV.
3. Connect the Pb (blue color) connector on your DVD player to the
corresponding Pb (blue color) connector in the Component group at the
rear of the HDTV.
4. Connect the Y (green color) connector on your DVD player to the
corresponding Y (green color) connector in the Component group at the
rear of the HDTV.
5. Using an audio cable (red and white connectors), connect the cable to the
audio output connectors associated with the Component output on your
DVD player and connect the other end to the audio connectors associated
with the Component input at the rear of the HDTV.
6. Turn on the power to the HDTV and DVD player.
7. Select Component using the INPUT button on the remote, side of the
HDTV or directly by pressing the Component button on the Remote
Control.
Note: Refer to your DVD player user manual for more information
about the video output requirements of the product.
To Next Page
Loading...
Need help?
General
