What to do if my AOC L22DK99U has picture but no sound?
If your AOC LCD TV has a good picture but no sound, check the volume control and make sure it is not muted by pressing MUTE or VOL +. Also, disconnect any headphones that may be plugged in. For HDMI connections, ensure the audio output setting of the connected device is set to PCM, as the TV's HDMI inputs support PCM 32, 44.1, and 48 kHz, 16, 20, and 24 bits.
Why does not the remote control of my AOC LCD TV work?
If the remote control for your AOC LCD TV isn't working, first check the polarity of the batteries or replace them. Ensure you are pointing the remote at the sensor on the front of the TV. Also, fluorescent lamps can interfere with the remote's operation, so try turning them off. Make sure there are no obstacles blocking the remote control sensor.
How to fix no picture or signal on AOC L22DK99U LCD TV from PC?
If your AOC LCD TV displays 'No Picture / No Signal' when connected to a PC, first confirm the PC is correctly connected to the TV using either the PC IN (with an HD15 cable) or HDMI IN. Ensure the output signal from the PC is a supported format. Turn the PC off, re-check the connection, and restart the PC to allow plug and play to auto-detect the TV and set up PC timing. Also, verify PC Power Management is activated.
How to adjust color on AOC L22DK99U?
If the color on your AOC LCD TV is off, the picture is dark, or too bright, press the PICTURE button to select the desired Picture Mode. You can also adjust the Picture Mode options within the Picture settings to fine-tune the image.
How to resolve noisy picture on AOC LCD TV?
To fix a noisy picture on your AOC LCD TV, ensure the antenna is connected using a 75-ohm coaxial cable. Keep the antenna cable away from other connecting cords. Use an undamaged antenna cable to avoid TV interference.
How to fix double images on AOC LCD TV?
If you are seeing double images or ghosts on your AOC LCD TV, check the antenna and cable connections. Also, check the antenna location and direction to ensure it's properly positioned.
What to do if my AOC L22DK99U LCD TV cannot receive or select channels?
If your AOC LCD TV cannot receive or select channels, perform Auto Program to add receivable channels that are not present in the TV’s memory. To receive or select cable channels, make sure that Cable in the Channel settings is set to On. To receive or select UHF channels over an antenna, make sure Cable is set to Off.
How to fix no picture from some video sources on AOC L22DK99U?
If your AOC LCD TV shows no picture from some video sources, check the connection between the optional video equipment and the TV Sources. Press INPUT on the remote control and select your desired input from the External Inputs list.
How to get rid of dotted lines or stripes on AOC L22DK99U LCD TV screen?
To address dotted lines or stripes on your AOC LCD TV screen, keep the TV away from noise sources such as cars, motorcycles, or hair-dryers. If using 300 ohm twin lead, move the excess lead away from the TV or try using 75 ohm coaxial cable instead.
Why does the wide mode change automatically on my AOC LCD TV?
If the Wide Mode on your AOC LCD TV changes automatically, the current Wide Mode setting is being replaced with the 4:3 Default setting when you change the channel or video input. This happens if 4:3 Default in the Screen settings is set to other than Off. To lock in a Wide Mode selected with WIDE on the remote control, set 4:3 Default to Off in the Screen settings. You may also want to check the Auto Wide option in the Screen settings.
To Next Page
General
