To Next Page

To Previous Page

37” LCD TV AOC L37W861

USING YOUR TV

To turn your TV on and off:

1 Make sure that the power cord is connected to your TV and a power outlet.

2 Press the POWER button to turn on your TV. The power indicator LED turns blue.

3 Press the POWER button again to return your TV to standby. The power indicator LED turns red.

To select the TV signal source:

• With the TV on, press the INPUT button on either the TV or the remote to choose from:

• TV

• Composite

• S-Video

• Component

• VGA

• HDMI

Setting up the channel list:

After you select your TV source, if you selected antenna or cable you need to set up the channel list. When you set

up your channel list, your TV searches for all available channels in your area and store a list of these channels.

When you press the CH

or CH v buttons, your TV skips the channels that do not have a signal.

To automatically set up the channel list:

1 Press the MENU button. The Main on-screen display menu opens with Setup highlighted.

2 Press the > button to enter the sub-menu, then or  button to highlight Ƹ Auto Ch Search.

3 Press ENTER or > to start the search.

Manually adding or deleting channels from the channel list

After you create a channel list using the Auto Ch Search option, you can manually add or delete channels from the

channel list.

To add or delete channels:

1 Press the MENU button. The Main OSD (On-Screen Display) menu opens with Setup highlighted.

2 Press the > button to enter the sub-menu, then or to highlight Ƹ Manual Channel Set. The Channel Setup

Table opens.

3 Press the or button to select a channel, then press then press Ƹ ENTER to toggle between viewable and not

viewable.

4 Press MENU or EXIT to close the menu.

To change channels:

• Press the CH v or CH ^ button on the remote control to go to the next lower or higher channel. Or Press the

number buttons to directly select a channel (for example, if you want channel 83, press 8, then press 3).Or Press the

RECALL button to go to the last viewed channel.

Selecting a digital sub-channel

Most digital TV channels have more than one channel. The main channel carries the signal for the main TV program.

The sub-channels carry signals for additional or alternate programming, such as a radio or news broadcast.

AOC L37W861 Service Manual

Other manuals for AOC L37W861