42’’ LCD TV AOC L42W765
6
2.2 To Use the Menus
1. Press the MENU button to display the main menu
2. Use the cursor up/down to select a menu item.
3. Use the cursor left/right to enter a submenu.
4. Press the OK button to enable/disable the function.
5. Press the MENU or EXIT button to exit the menu. Press the MENU button to enter the main OSD (On Screen
Display). Adjust the items including Setup menu, Video menu, Audio menu and Feature menu. However, some
function items in the menus may only be enabled in the particular source modes.
The Setup menu in TV mode shows as below. In others source modes, the Setup menu only shows Menu
Language and Aspect Ratio items.
1. Tuning Band: Select TV source signal from the Air (antenna) or Cable (CATV).
2. DTV Signal: Show the intensity of the received DTV signal.
3. Auto Ch Search: Automatically scan all NTSC / ATSC TV channels and then store in the channel table. In
channel scan process, the OSD can display the number of channels which had been found.
4. Add on Ch search: Add channels which are new found.
5. Manual Channel Set: Show the channel setup table. User can choose to display the ATSC or NTSC TV channels
and then edit (add/delete) the channel numbers.
6.Channel Labels: Show the NTSC or ATSC TV channel label menu for user modifying channel labels specifically.
7. Menu Language: Select the menu display language. (English /Spanish /French)
8. Aspect Ratio: Select the display aspect ratio. (Normal / Zoom / Wide / Cinema)
9. Favorite Channel Mode: when favorite channel mode on user can edit favorite channel table in favorite channel
set option.
To Next Page
Loading...
Need help?
General
