1. In Android system main interface, move cursor to “network”--“Ethernet”item, click mouse left button to get into ,
record MAC address.
3, the software upgrade content and procedures :
1. U disk formatted as FAT32 format , and then upgrade the software ( software name and case is MstarUpgrade, suffix
bin) put in the U disk .
There are two ways for software upgrade, recommended mode 1.
Method 1: In the case of TV normally boot, enter the factory menu upgrade: power on machine, insert disk into the TV
USB interface, and then enter the factory menu, move the cursor to the Other Option Press OK to enter , and then move
the cursor to Upgrade Main options , press OK to upgrade.
Wite donw YPbPr(SD)an
YPbPr(HD)value before upgrade
and wite down VGA mode
R/G/B-GAIN and R/B/G-OFFSET
value ， change back to original
value after software upgrade
finished .
The bigger the file, the longer time
upgrade will take, it is normally about
3~4 minutes， give enough time to
make sure upgrade success
MAC address
27
To Next Page
Loading...
