۶ | Page
NOTE:
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
Cable Connections On Back of Monitor and Computer
1. Power
2. USB
3. Audio
4. Analog (DB-15 VGA cable)
5.HDMI
To protect equipment, always turn off the PC and LCD monitor before connecting.
1. Connect the power cable to the AC port on the back of the monitor.
2. To link the USB camera, please connect the LCD monitor and your PC with USB cable.
3. Connect the audio cable to audio in port on the back of the monitor
4. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port.
5. (Optional – Requires a video card with HDMI port) - Connect one end of the HDMI cable to the back of
the monitor and connect the other end to the computer’s HDMI port.
6. Turn on your monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting
.
To Next Page
Loading...
Need help?
General
