What to do if there is insufficient suction or suction failure in AOHUA VET-6010 Medical Equipment?
If you're experiencing insufficient suction or suction failure with your AOHUA Medical Equipment, examine the suction pump, suction tube, suction connector, and instrument channel to identify any potential issues.
How to fix insufficient air or water feeding failure in AOHUA Medical Equipment?
If you're facing insufficient air/water feeding or complete failure with your AOHUA Medical Equipment, check the following: * The connection between the endoscope connector and imaging processor. * The water bottle assembly. * The air/water supply connector. * The air pump.
How to troubleshoot unclear image or signal interference in AOHUA VET-6010 Medical Equipment?
If you're experiencing an unclear image or signal interference with your AOHUA Medical Equipment, verify the voltage stability and inspect the lens surface for any dirt.
What to check if there is no or insufficient illumination in AOHUA Medical Equipment?
If you notice no or insufficient illumination with your AOHUA Medical Equipment, check the built-in light source and the endoscope connector.
What to do if the instrument fails to access the instrument channel in AOHUA VET-6010 Medical Equipment?
If the instrument fails to access the instrument channel in your AOHUA Medical Equipment, check for any foreign objects obstructing the instrument channel.
Prohibition of user repair and modification; requires authorized personnel.
Lists general warnings and cautions for handling the instrument.
Procedure to check the endoscope's sealing integrity using a leakage tester.
Detailed inspection steps for the insertion tube and bending section.
Checks for obstructions and proper function of the instrument channel.
Guidance on inserting, observing, and adjusting the endoscope.
Instructions for using biopsy forceps to cut specimens.
Detailed methods for cleaning and disinfecting the endoscope and accessories.
Table listing common irregularities and their corresponding solutions.
Instructions for sending the endoscope for repair, including required information.
General| Model | VET-6010 |
|---|---|
| Length | 1000mm |
| Working Channel | 2.0mm |
| Light Source | LED |
| Application | Veterinary |
| Category | Endoscopy |
| Field of View | 120 degrees |
| Direction of View | Forward |
To Next Page