What to do if the AOHUA Computer Hardware image display fails on the monitor?
If there is no image displayed on the monitor, ensure the power switch is pressed down. Check the video output cable connection between the imaging processor and the monitor. Make sure the correct monitor input channel is selected and that the monitor brightness is appropriately set.
Why is there no power supply for my AOHUA Computer Hardware endoscope imaging processor?
If there is no power supply to the AOHUA endoscope imaging processor, inspect the mains power supply. If the fuse has melted, replace it with a new one.
Why is my AOHUA VET-OR1200HD Computer Hardware endoscopic image achromatic or showing abnormal color?
If you're experiencing an achromatic endoscopic image or abnormal color on your AOHUA Computer Hardware, first conduct a white balance adjustment. If the issue persists, verify that the monitor's chromaticity settings are appropriately configured.
How to fix an endoscopic image that is too bright on AOHUA VET-OR1200HD Computer Hardware?
If the endoscopic image from your AOHUA Computer Hardware appears too bright, adjust the brightness and contrast settings on the monitor.
How to eliminate jitter, drift, and interference ripples on AOHUA Computer Hardware image?
If you observe jitter, drift, or interference ripples on the image from your AOHUA Computer Hardware, ensure the correct signal system is selected on the monitor. Also, relocate the working space away from any potential interference sources.
What to do if AOHUA VET-OR1200HD has insufficient air/water feeding?
If there is insufficient air/water feeding or a complete failure in your AOHUA Computer Hardware, first check if the air pump is turned ON. Ensure that a water bottle is connected. Verify the connection between the endoscope connector and the imaging processor.
Why is my AOHUA VET-OR1200HD endoscopic image still?
If the endoscopic image from your AOHUA Computer Hardware is still, it's possible the image freezing function is active. Press the freeze button to return to the real-time image.
Verifying all items in the package against the provided list.
Covers front/rear panel descriptions, product traits, performance, and technical specs.
Detailed explanation of the front panel buttons and indicators for specific models.
Continues the description of front panel controls and their functions.
Detailed explanation of the front panel buttons and indicators for the VET-OR1200R model.
Outlines general product traits and performance features.
Details operating environment and technical specifications.
Details the rear panel ports and connectors for the VET-OR1200HD model.
Provides detailed technical specifications for the imaging processor models.
Details the rear panel ports and connectors for the VET-OR1200HD-Li model.
Details the rear panel ports and connectors for the VET-OR1200R model.
Provides detailed technical specifications for the imaging processor models.
Procedures for installing the imaging processor and conducting essential operational checks.
Procedures to check the power supply and ensure proper operation.
Steps to verify the functionality of the examination light.
Instructions for connecting the monitor and important safety precautions during installation.
Verifying brightness, monitor display, and the freeze/release image functionality.
Checks for mode switch, air/water feeding, and proper power down.
Safety guidelines, powering on, and overview of panel button functions.
Details white balance, brightness, AGC, edge enhancement, and hemoglobin enhancement.
Covers freezing, replaying, recording, photos, air feeding, and model-specific modes.
Procedure for adjusting the white balance for accurate color representation.
Introduction to panel buttons and how to ignite the examination lamp.
Detailed steps for white balance adjustment and edge enhancement controls.
Procedures for AGC brightness adjustment and hemoglobin enhancement.
How to freeze, release, and replay captured endoscopic images.
Controls for IRIS mode and procedures for video recording.
Instructions for capturing photos and activating air feeding.
Model-specific mode selection and Moiré removal functions.
Mode switching and battery status check for specific models.
Procedures for safely shutting down and replacing fuses.
Guidelines for maintaining, storing, and disposing of the imaging processor.
Troubleshooting guide and procedures for device repair.
A table listing common issues, their causes, and solutions.
Procedures and precautions for sending the device for repair.
Information on manufacture date, service life, warranty policy, and document issue date.
Information on product manufacture date and recommended service life.
Details the intended use of the processor and the importance of thoroughly reviewing the manual.
Outlines operator qualifications and safety guidelines for ancillary equipment.
Information on ensuring equipment compatibility and the policy for repairs and modifications.
Explains signal word meanings and lists critical safety warnings and cautions.
Warnings on operating the device in specific environments and potential risks like interference.
Cautions regarding electrical connections, handling buttons, and using compatible accessories.
Explains common labels and symbols found on the equipment for user reference.
Forms for user details and explanations of the warranty policy and conditions.
General| Brand | AOHUA |
|---|---|
| Model | VET-OR1200HD |
| Category | Computer Hardware |
| Language | English |
To Next Page