AOIP CALYS 100 - User Manual

RCS : n°447 524 794 00032 – TVA : n°FR13447524794
50-52 Avenue Paul Langevin – F-91130 Ris Orangis – Tel : 01 6902 88 88 / Fax : 01 69 02 04 38 – www.aoip.fr
CALYS 50 / 75 / 100
Calibrateur de Process Multifonction
Multifunction Process Calibrator
Mode d’emploi
Instruction manual

Summary

Product Introduction

Multifunction Process Calibrator

Overview of the CALYS 50/75/100 multifunction process calibrator.

Software Overview

Software Functionality and UI

Safety Instructions

Safety Standards and Operation

Details compliance with EN 61010-1 and safe unit operation guidelines.

Getting Started

Powering On and Basic Measurement

Procedure for initial power-up and basic measurement operations.

Measuring DC Voltage and Current

Step-by-step guides for measuring DC voltage and current.

Measuring Resistance and Continuity

Temperature and Pressure Measurement

Guides for measuring temperature and pressure.

Generation; Simulation

DC Voltage and Current Generation

Steps to generate DC voltage and current outputs.

Pulse Generation

Advanced Operation

Simulation Modes Overview

Introduces various transmission modes for checking instruments and transmitters.

Scaling and Differential Measurements

Calibrated Sensors and Calibration

Using calibrated sensors and creating calibration reports.

Storing Acquisitions and Configurations

Technical Specifications

Measurement Function Specifications

Details accuracy, resolution, and coefficients for measurement functions.

DC Voltage and Current Specs (CALYS 50;75)

Temperature and Frequency Specs

DC Voltage and Current Specs (CALYS 100)

Transmission; Simulation Specs

DC Voltage and Current Transmission Specs (CALYS 50;75)

Temperature Transmission Specs

DC Voltage and Current Transmission Specs (CALYS 100)

AOIP CALYS 100 Specifications

General

DC Voltage Range	0 to 1000 V
Thermocouple Types	J, K, T, E, R, S, B, N
RTD Types	Pt100, Pt1000
Power Supply	100 to 240 V AC, 50/60 Hz
Interface	USB
Operating Temperature	-10 °C to 50 °C