CALIBRATION
CALYS 50
On-site multifunction calibrator
Simultaneous Measurement and Generation
Protected for on-site use
Easy connection system
Designed with a close collaboration with industrials, Calys 50 integrates all the necessary
functions for adjustment and maintenance of process.
Its ergonomic design and its embedded software allow Calys 50 to be a high performance
calibrator and very easy to use.
IP 54, full protected by an anti-shock sheath, with "easy-connect®" terminals integrated, a
very contrasted backlight display, it will be comfortable to use in all conditions
Its elastomer keypad protects it from dirty and grease marks, the keys allow to use Calys 50
with gloves. It has 10 working configurations recorded by user or user group, to always find
the good configuration for designed and repetitive jobs.
Ed 02/10/04 Document susceptible d'être modifié
To Next Page
