AOK BC168 - Setup: Discharge and Balance Parameters; Configuring Discharge Voltage and Current; Balance Voltage and Current Setup

- 5 -
d. Under discharge cut-off voltage mode, Push ↑ or ↓, and then set up
discharge cut-off voltage, after than push MODE to enter discharge current
set up MODE. (setting range: 2.00v ~ 4.20V, default value 3.80V)
e. Under discharge curent set up Mode, Push ↑ or ↓, and then set up
dicharge current, after than push MODE to enter balance minimum voltage
set up mode. (setting range: 0.1A ~ 3.0A, default value 3.0A)
f. Under Balance minimum voltage set up MODE, Push ↑ or ↓ to set up
balance minimum voltage, after than push MODE to enter balance current
set up mode. (setting range: 2.00V ~ 4.20V, default value 3.80V)