AOODOR 800-034 - Gazebo Assembly Steps; Post Assembly

Assembly
2
Step1:Inser t the post plate cover (O) into
the suppor ting post (A). Fit the post
b o t t o m p l a t e ( M ) u n d e r n e a t h t h e
supporting post (A). Insert two M6x10
bolts (W) into the supporting post (A)
and secure to the post bottom plate (M)
using the Allen wrench (5), but do not
overtighten.
Slide the post plate cover (O) down into
place. Repeat this step for the remaining
supporting posts (A), post bottom plates
(M) and post plate covers (O).
Step2:Inser t the post plate cover (N) into
the post (B). Fit the post (A)and(B) using
two M6x10 bolts (W) with allen wrench
(5), but do not over tighten.
Slide the post plate cover (O) down into
place.
Fit the rib support connecting(S) with
post(B) using one M6x10 bolts(W).
Repeat this step for the remaining posts
A
1
O
M
W
W
2
W
S
B
N
A
4