To Next PageTo Next Page
Need help?Do you have a question about the Aosenma CG035X and is the answer not in the manual?
Details of the quadcopter's technical properties, including dimensions and frequencies.
Lists the main capabilities and functionalities of the quadcopter.
Details the various flight modes and actions the quadcopter can perform.
Lists all components provided within the quadcopter box.
Guidelines for charging, handling, and disposing of quadcopter batteries safely.
Safety checks and precautions for the quadcopter itself before operation.
Details the physical arrangement and labeling of buttons and sticks on the remote.
Describes the operation of left and right control sticks for flight maneuvers.
Warns about potential confusion in motor labeling within the manual.
Guides the user through attaching the landing gear to the quadcopter body.
Provides methods to identify clockwise and counter-clockwise rotating propellers.
Instructions to calibrate the remote control sticks and ensure proper functionality.
How to switch between control modes (Mode 1 and Mode 2) on the remote controller.
Detailed instructions on how to ensure a stable GPS connection before flight.
Crucial warnings about software use and its impact on the quadcopter's firmware.
Lists the necessary tools for performing diagnostic and repair tasks.
Covers initial checks like calibration and visual inspection for motor issues.
Detailed steps for testing motor functionality using a drill and multimeter.
Further tests including AC voltage measurement and motor swapping.
Focuses on Electronic Speed Controller (ESC) issues and testing.
Troubleshooting steps for an FPV monitor that fails to power up.
Instructions on how to disable the gimbal to improve flight stability.
General