21
2: Sequential Flashing of V1 - V5
This indicates that the wheelchair is currently in the charging
process. To operate the wheelchair, it's essential to unplug the
charger first.
3: Control Beeping and Flashing Alarms
When the control system is activated, accompanied by sound and
light alarms,it restricts the movement of the wheelchair. This signifies
that the electric wheelchair is in manual mode.
4: About Joystick
The primary purpose of the joystick is to govern both the speed and
direction of the wheelchair. This versati le controller enables the
wheelchair to navigate in various directions. The degree of push
applied to the joystick dictates the speed at which the wheelchair
moves in a particular direction. The further the joystick is displaced
from its central position, the greater the speed at which the
wheelchair will travel. Upon releasing the control handle, the
wheelchair promptly engages its automatic braking system.
The left picture is an indicator for the
wheelchair's speed settings. One illuminated
light bar represents the lowest speed, while all
five bars li t up indicate the highest speed.
1: Stable Power Display
When the power display remains stable, it signifies that the system is
operating correctly.
To Next Page
Loading...