6
If the lifetime of windscreen protector has come to an end, please dispose of via the recycling container. Please contact your community or city
administration regarding other disposal options.
Maintenance: The windscreen protector is maintenance-free when used in accordance with the intended purpose.
Care: Allow the windscreen protector to dry fully before storing for a longer period of time. Keep the suction cups clean to
ensure optimum adhesion.
Open the driver and passenger doors of your vehicle. Place the windscreen protector on the windscreen with the foam side down. The securing
loops on the sides should be at the top, right and left, and the suction cups at the bottom. Align the windscreen protector to ensure that as much
of the windscreen is covered as possible. Clean the parts of the windscreen that you will be attaching the suction cups to. Pull the securing loops
around the A-columns (side frames of the windscreen) and close the doors, Figure 2.
The knob at the end of the securing loop means that the windscreen protector cannot be pulled out and is thus secured to prevent theft. Smooth
out the windscreen protector and press to secure the suction cups. Fold the windscreen wipers back to rest on the windscreen.
To remove the windscreen protector, proceed in reverse order.
First remove the windscreen protector before switching on the ignition of your vehicle. The windscreen wipers may be
returned to their rest position when the vehicle is switched on. If the windscreen protector is still in place, it may be
damaged or may damage the wipers.
6. MAINTENANCE AND CARE
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
To Next Page
Loading...