Need help?Do you have a question about the APART MA125 and is the answer not in the manual?
Controls mains power on and off.
Red LED indicates active protections like overheating or low impedance.
Green LED for signal level, red for auto gain control below clipping.
Balanced 1/4" TRS phone jack for Microphone 1, parallel with other inputs.
Adjusts the volume for the Microphone 1 input.
Adjusts the overall signal volume.
Sets the local mains voltage (230VAC or 115VAC).
IEC power socket with a 2.5AT slow blow fuse compartment.
Terminals for low impedance (8 ohm) and 100V line outputs.
Controls mains power on and off.
Red LED indicates active protections like overheating or low impedance.
Green LED for signal level, red for auto gain control below clipping.
Balanced 1/4" TRS phone jack for Microphone 1, parallel with other inputs.
Adjusts the volume for the Microphone 1 input.
Adjusts the overall signal volume.
Sets the local mains voltage (230VAC or 115VAC).
IEC power socket with a 2.5AT slow blow fuse compartment.
Terminals for low impedance (8 ohm) and 100V line outputs.
General| Frequency range | 40 - 22000 Hz |
|---|---|
| RMS rated power | 125 W |
| Signal-to-Noise Ratio (SNR) | 95 dB |
| Connectivity technology | Wired |
| On/off switch | Yes |
| Product color | Black |
| Rack capacity | 2U |
| Power requirements | 230/115 V, 24V DC |
| Dimensions (WxDxH) | 483 x 230 x 88 mm |
| AC input voltage | 115-230 V |
| Power consumption (typical) | 350 W |
Weight and Dimensions| Depth | 261 mm |
|---|---|
| Weight | 9000 g |
To Next Page
