Need help?Do you have a question about the APART PM1122R and is the answer not in the manual?
Power| music and mic mix level control voltage | 0-10 V |
|---|
Weight and Dimensions| dimensions | 80 x 115 mm (40 mm depth behind panel) |
|---|---|
| shipping weight | 220 g |
| net weight | 165 g |
Line Input| frequency response | 20 Hz - 22 KHz |
|---|---|
| sensitivity - impedance | 250 mV/ -12 dBv - 17 Kohm |
| max input level | -3 dBV |
Mic Input| frequency response | 100 Hz - 20 KHz |
|---|---|
| sensitivity - impedance | 3 mV/ -50 dBv - 1.2 Kohm |
| phantom power | 20 V |
Weight and Dimensions| dimensions | 116 x 116 mm (40 mm depth behind panel) |
|---|---|
| shipping weight | 320 g |
| net weight | 260 g |
Details the controls and indicators on the PM1122R front panel, including music level, selector, and mic mix.
Details the controls and indicators on the PM1122RL front panel, including local audio and system audio controls.
Overview of the APart PM1122R/RL remote control panels and their connection method via CAT5 cable.
Explains trim potentiometers for setting maximum music and microphone levels, and jumper positions for level control.
Details jumper settings for phantom power on the XLR connector and control mode selection.
Specifications for music/mic mix level, music selector, and power supply via RJ-45.
Technical details for the line input (mini jack) and microphone input (XLR) on the PM1122RL.
Dimensions, weight, and compatibility with Bticino in-wall and on-wall boxes for both models.
To Next Page