5
Safety instructions
• Keep this manual for future reference.
• Take care of your speaker wires, they should be free of damage.
Damaged speaker wires may result in poor sound quality and
can damage amplifiers.
• No main power shall be connected to the speakers, doing so
will damage the speaker.
• This speaker should only be serviced by qualified personnel. If
not, warranty might be void.
• Use cables of the right gauge, certainly for long runs.
• Use cables with clear color indication and maintain polarity
throughout the whole system.
• Avoid loud feedback for this is a main speaker killer.
• Clean only with dry cloth.
• Do not operate near heaters or place it on other apparatus
which produce a lot of heat.
• Only use accessories specified by the manufacturer.
• Make sure the mounting surface can easily support the
speaker’s weight.
• Use only industry-accepted rigging tools and methods.
• Use sufficient loudspeakers and avoid death spots.
• Being exposed to loud levels over a long time can cause severe
hearing loss.
• Don’t forget to consult the local law directions regarding
producing sound in public places.
• Please check the unit’s condition after unpacking. If the outside
of the carton box has been damaged, inform your shipper
immediately.
To Next Page
Loading...
