To Next PageTo Next Page
Need help?Do you have a question about the APC 200 and is the answer not in the manual?
Provides details about the NetBotz Rack Monitor 200 software interface.
Outlines the scope and content of the document.
Lists other available documentation for the product.
Defines key terms used throughout the manual.
Introduces the different interfaces for managing the Main Module.
Details the essential TCP/IP settings required for the Main Module's network operation.
Explains the priority order for accessing the Main Module's interface.
Describes the different user access levels and their permissions.
Provides steps to recover a lost password for the Main Module.
Explains the system's watchdog mechanisms for detecting and recovering from internal problems.
Introduces the Web interface for managing the Main Module and connected devices.
Lists the web browsers compatible with the Web interface.
Details how to access the Web interface using DNS name or IP address.
Explains the correct formats for accessing the Web interface via URL.
Describes the initial page displayed upon logging into the Web interface.
Guides users on navigating and utilizing the Web interface elements.
Covers troubleshooting of physical setup and software interface issues.
Explains the causes and troubleshooting steps for A-Link Power Overload alarms.
Details alarms indicating a device is disconnected or has lost communication.
Provides instructions for troubleshooting when "Err" appears in the software interface.
Addresses the issue where sensors are connected but not detected by the software.
Describes daily tasks for monitoring the system via the Web interface tabs.
Explains the functionality of the Home tab for viewing system status.
Guides users on viewing and configuring sensors via the Sensors tab.
Allows viewing of all active alarms for various sensors and outputs.
Covers setting up user names and passwords for different account types.
Discusses administering remote access to the Main Module.
Guides the process of configuring the RADIUS server for authentication.
Explains how to set the time before an inactive user is logged off.
Covers TCP/IP settings and communication configurations for the Main Module.
Describes how to set the communication speed for the TCP/IP port.
Guides users on configuring and testing the Domain Name System (DNS).
Covers options for enabling or disabling Telnet and SSH access to the control console.
Explains how to configure event actions and notification settings.
Covers sending messages to Syslog servers for centralized logging.
Explains how to use logs and queries for indirect notification.
Covers system identification, date/time, and general preferences.
Outlines the capabilities, system requirements, and installation of the IP Configuration Wizard.
Explains how to use the Wizard to configure TCP/IP settings for devices.
Guides on installing the Device IP Configuration Wizard.
Guides on retrieving and exporting configuration settings via an .ini file.
Details the contents and structure of the configuration .ini file.
Details how to transfer the .ini file to a single Main Module.
Explains how to export the .ini file to multiple Main Modules.
Provides an overview of the firmware upgrade process for Main and Expansion Modules.
Guides on upgrading the firmware of a single Main Module.
Explains how to upgrade firmware on multiple Main Modules simultaneously.
Guides on verifying the success or failure of a firmware upgrade.
Details the terms and conditions of the two-year factory warranty.
Specifies that the warranty is non-transferable and requires product registration.
Lists conditions and circumstances excluded from warranty coverage.
Provides information on how to submit warranty claims.
Explains the watchdog mechanism protecting against network inaccessibility.
Details how the network timer is reset to prevent unexpected restarts.
Guides on logging into the control console via local or remote connections.
Guides on accessing the control console via a local serial connection.
Displays an example of the main screen shown after logging into the control console.
Details the information and status fields displayed on the main screen.
Guides on navigating and using menus within the control console interface.
Explains the structure and organization of the control console menus.
Describes the main menu options available in the control console.
Details how to view and configure temperature and humidity sensors.
Defines temperature and humidity thresholds for triggering alarms.
Configures settings for temperature rate of change alarms.
Provides access to APC's Knowledge Base and support requests via the corporate website.
Directs users to localized APC websites for country-specific support information.
Lists contact information for APC's regional customer support centers.
General