USER’S GUIDE
NetBotz Rack Monitor 200
16
Network menu
Use the Network menu to complete the following tasks:
• Configure the TCP/IP settings for the Main Module.
• Use the Ping utility (available only through the control console).
• Define settings that affect the DNS, FTP, Telnet/SSH, Web interface, SSL, SNMPv1,
SNMPv3, e-mail, Modbus, and Syslog features of the Main Module.
System menu
Use the System menu to complete the following tasks:
• Control Administrator and Device Manager access. (You cannot control Read-Only
User access through the control console.)
• Define the system Name, Contact, and Location values.
• Set the Date and Time used by the Rack Monitor 200.
• Through the Tools menu:
– Restart the Main Module interface.
– Reset parameters to their default values.
– Delete SSH host keys and SSL certificates.
– Upload an initialization file.
– Transfer files.
• Through the RADIUS menu:
– Define access, primary and secondary servers, and primary and secondary server
secrets.
– Set Timeout in seconds.
• Access system information about the Main Module.
To Next Page
Loading...