USER’S GUIDE
NetBotz Rack Monitor 200
29
Software Interface Shows “Err”
Use the following instructions if Err appears anywhere in the software interface.
This procedure requires you to troubleshoot your setup on-site
while monitoring the Web interface or control console. See the
NetBotz Rack Monitor 200 Installation and Quick Configuration
Manual for local access to the control console, if needed, and for
system setup details. The NetBotz Rack Monitor 200 Installation
and Quick Configuration Manual was provided with your Rack
Monitor 200 and is also available on the APC Web site,
www.apc.com.
Do you have one or more Temperature Sensors with Digital Display (AP9520T) or
Temperature/Humidity Sensors with Digital Display (AP9520TH) connected to your
system?
No Contact APC Worldwide Customer Support for further assistance.
To Next Page
Loading...