APC AP9617 - How to Recover from a Lost Password

Quick Start: Network Management Card – DC Series 9
How to Access a Configured Network Management Card
FTP
You can use FTP (enabled by default) to download new
firmware to a Management Card, or to access a copy of a
Management Card’s event or data log.
1. At a command prompt, use the following command line,
and press Enter:
ftp <address>
As <address>, use the Management Card’s IP
address.
2. Enter the user name and password (apc by default).
APC
Management
Card Wizard
You can use the APC Management Card Wizard to configure
multiple Management Cards over the network.