2 Quick Start: Network Management Card – DC Series
Quick Configuration
APC
Management
Card Wizard
You can use the APC Management Card Wizard at a
Windows
®
98, Windows NT
®
4.0, Windows 2000, or
Windows XP computer to configure a Management Card.
1. Select the Management Card Wizard from the initial
pop-up menu on the APC Network Management Card
utility CD, and follow the on-screen instructions to
install it.
2. Launch the Wizard, when prompted, or, if prompted to
restart the computer, access the Wizard from the Start
menu after the computer has restarted.
3. Wait for the Wizard to discover the unconfigured
Management Card, then follow the on-screen
instructions.
See als
To configure multiple Management Cards, or to
configure a Management Card from a
configuration file, see the Management Card
Addendum (.\doc\en\addendum.pdf).
Note
If you leave the Start a Web browser when
finished option enabled, you can use apc for
both the user name and password to access
the Management Card through your browser.
To Next Page
Loading...
