®
USER’S GUIDE
network management card
80
How to Configure Individual Events
“Event List” page
The Actions option in the Events menu opens the “Event Actions
Configuration” page. You use the Details button in this page to access a
complete list of the System (Management Card) and DC (DC Power Plant)
events that can be reported by your Management Card.
Each event is identified by its unique code, its description, and its assigned
severity level, as shown in the following examples.
Detailed Event Action Configuration page
The event codes provide a link to a page that allows you to do the following:
• Change the selected event’s severity level
• Enable or disable whether the event uses the Event Log, SNMP traps,
or e-mail notifications
For information about severity levels and how they define the
actions associated with events, see Event Actions (Web
Interface only).
Code Description Severity
0x0008 System: Password changed. Informational
0x0D06 DC: A Minor alarm is active in the DC power plant. Warning
To Next Page
Loading...
