- 10 -
Surge Protected Telephone Jacks
The H15 provides a telephone line splitter with surge protection
to protects components connected via telephone line. Connect
the supplied RJ11 Telephone cable from the wall jack (source)
to the telephone line connector marked “IN”. Connect other
telephone cables to the connectors marked “OUT A” and/or
“OUT B” and then to the equipment to be protected (Telephone,
DVR, DSS, or DSL).
Additional Surge Protected COAX/RF Connectors
The H15 also provides a surge protection for your DSS system
or RF Antenna system. The surge protection feature prevents
surges traveling over Coaxial cable from damaging the equip-
ment. Connect the coaxial cable from the DSS or Antenna sys-
tem to the connector marked “IN”, connect another coaxial
cable from the connector marked “OUT” to the device being
protected (DSS or Antenna).
7
8
To Next Page
Loading...