5UPS Network Management Card 2 User’s Guide
Front Panel (AP9630)
Features
Front Panel (AP9631)
Features
Item Description
Serial configuration port Connects the Management Card to a local computer to configure
initial network settings or access the command line interface.
10/100 Base-T connector Connects the Management Card to the Ethernet network.
Reset button Resets the Management Card while power remains on.
Link-RX/TX (10/100) LED See “Link-RX/TX (10/100) LED” on page 7.
Status LED See “Status LED” on page 6.
Item Description
USB ports Reserved for future use.
Sensor ports Connect temperature sensors, temperature/humidity sensors, or
relay input/output connectors that support two input contacts and
one output relay.
10/100 Base-T connector Connects the Management Card to the Ethernet network.
To Next Page
Loading...