21UPS Network Management Card 2 User’s Guide
system
Access: Administrator only
Description: View and set the system name, the contact, the location and view up time as well as
the date and time, the logged-on user, and the high-level system status P, N, A (see “Main screen
status fields” ).
Example 1: To set the device location as Test Lab, type:
system -l “Test Lab”
Example 2: To set the system name as Don Adams, type:
system -n “Don Adams”
tcpip
Access: Administrator only
Description: View and manually configure these network settings for the Management Card:
Example 1: To view the network settings of the Management Card, type tcpip and press ENTER.
Example 2: To manually configure an IP address of 150.250.6.10 for the Management Card, type:
tcpip -i 150.250.6.10
tcpip6
Access: Administrator only
Option Argument Description
-n <system name> Define the device name, the name of the person responsible for the device,
and the physical location of the device.
N
OTE: If you define a value with more than one word, you must enclose the
value in quotation marks.
These values are also used by InfraStruXure Central and the Management
Card’s SNMP agent.
-c <system contact>
-l <system location>
Option Argument Description
-i <IP address> Type the IP address of the Management Card, using the format
xxx.xxx.xxx.xxx
-s <subnet mask> Type the subnet mask for the Management Card.
-g <gateway> Type the IP address of the default gateway. Do not use the loopback
address (127.0.0.1) as the default gateway.
-d <domain name> Type the DNS name configured by the DNS server.
-h <host name> Type the host name that the Management Card will use.
To Next Page
Loading...