Folding
Once the lines are sorted and combed, increase the tension on the canopy using the tie-down straps attached to the bridle and
bungee octopus on the crown / packing tabs. Next, starting with line 1, then 2, and so on, page through each gore of the canopy,
laying each one flat from the skirt up to the crown, and ensuring that the inner part of each gore is also laid out evenly, until half
way through the canopy at number 8. Now flip the second side on top of the folded side, and repeat the process, again going
from line 1 through to line 8 on the second side.
To Next Page
Loading...