Apcon ACI-3144-XR User Manual (English)

Need help?

Do you have a question about the Apcon ACI-3144-XR and is the answer not in the manual?

Apcon ACI-3144-XR Specifications

General

Brand	Apcon
Model	ACI-3144-XR
Category	Chassis
Language	English

Summary

Chapter 3: Specifications and Compatibility

Power and Electrical Specifications

Covers power requirements, consumption, and redundancy for the ACI-3144-XR chassis.

Chapter 4: Installation and Set Up

Plan the Installation

Safety Precautions

Covers general safety, ESD protection, and environmental considerations during installation.

Install the Chassis

Provides instructions for installing the chassis in a rack or on a stable surface.

Connect Power to the Chassis

Guides on connecting AC or DC power supplies to the chassis.

Chapter 5: Configure the Chassis

Default Settings

Lists default IP address, subnet mask, and gateway for the chassis management port.

Use the Front Panel Interface

Explains how to use the LCD touch screen for initial chassis configuration.

Configuration Options

Use WEBXR to Configure the Switch

Guides on configuring the chassis using the WEBXR web interface.

Use CLI to Configure the Chassis

Provides instructions for configuring the chassis using the embedded Command Line Interface (CLI).

Chapter 6: Maintain the Chassis

Maintenance of Components

Introduces component maintenance, including hot-swappable modules and software upgrades.

Blades

Transceivers and Fiber Optic Cables

Power Supplies

Describes how to remove and replace power supply units for the chassis.

Fan Module

Controllers

Discusses controller support and considerations for replacing primary and secondary controllers.

System Recovery

Outlines the procedure for system recovery when a controller is in a locked state.

Apcon ACI-3144-XR User Manual

Table of Contents