Hint: A long press on the left arrow will provide a static
white color. A long press on the right arrow will provide a
rainbow program. A long press on “Slow Down” stops a
flash effect/color change.
Disabling of the Battery Status Indicator
The red/green glowing indicator of the battery level can be
disabled.
› Step 1: Press and hold the power button on fixture until
it flashes blue/white (This is also placing the fixture into
Service Mode).
› Step 2: Remove the battery compartment out of the
ApeRemote.
› Step 3: Slide the battery compartment back into the
remote while pushing the “flashlight” symbol. (Remote
will be flashing red on groups 1 & 4).
› Step 4: Push the “Dim” button on the remote.
› Step 5: Press the power button on fixture one time.
› Step 6: Press the “Power” button on the remote.
Enabling of the Battery Status Indicator
› Step 1: Press and hold the power button on fixture until
it flashes blue/white (This is also placing the fixture into
Service Mode).
To Next Page
Loading...