Need help?Do you have a question about the Ape Labs ApeRemote and is the answer not in the manual?
Assign Ape Labs fixtures to specific groups for differential control within a room.
Control programs, brightness, speed, and sound active mode by selecting groups.
Adjust brightness by tapping or long-pressing dedicated remote buttons for increase, decrease, and max settings.
Cycle through static colors and programs, or select specific static white or rainbow programs.
Enter sound-active mode or standby mode, with options to sync fixtures and view battery status.
Select individual control groups or long-press to select all four groups simultaneously.
Adjust program effect speed or strobe speed by tapping or long-pressing speed adjustment buttons.
Step-by-step guide to disable the red/green glowing battery level indicator on the remote.
Step-by-step guide to re-enable the red/green glowing battery level indicator on the remote.
Procedure to permanently pair a remote to specific fixtures, allowing for custom group assignments.
Instructions to unpair a remote from fixtures by following specific button press sequences.
General| Type | Remote Control |
|---|---|
| Radio Frequency | 2.4 GHz |
| Compatibility | Ape Labs products |
| Range | Up to 30 meters |
| Power Source | Battery |
| Connectivity | wireless |
To Next Page