Need help?Do you have a question about the Apec Water Ultimate RO and is the answer not in the manual?
General| Type | Reverse Osmosis |
|---|---|
| Stages | 6 |
| Tank Capacity | 4 Gallons |
| Operating Temperature | 40-100 °F |
| Filter Lifespan | 6-12 months (pre-filters), 2-3 years (RO membrane), 1 year (post-filter) |
| Certifications | NSF/ANSI 58 |
| Included Filters | Sediment, Carbon Block, RO Membrane |
| Warranty | 1-year limited warranty |
Check all components and fittings for damage before starting installation.
List of tools required for installing the RO system.
Key parameters like pressure, temperature, and TDS for optimal operation.
Guidelines for safe and compliant installation, considering local regulations.
Lists the primary components of the RO system, such as the filter housing.
Details the items provided in the installation kit for connecting the system.
Instructions for correctly inserting filters into their respective housings.
Guide on connecting the system to the cold water supply line.
Step-by-step instructions for installing the drain saddle.
Guidance on drilling holes and mounting the RO faucet correctly.
Advice on where to place the main system and storage tank.
Detailed steps for connecting the various colored tubing lines.
Advice on keeping the system indoors and running within capacity.
Recommended frequency for changing stages 1, 2, and 3 pre-filters.
Instructions on how to remove and replace the RO membrane element.
Guidance for replacing the post-carbon filter.
Definitions of terms like GPD, PSI, TDS, and PPM.
Diagram and explanation of how water moves through the system.
How water pressure affects RO system performance and output.
Procedures for using a TDS meter to check water quality.
Factors influencing how long it takes for the tank to fill.
Identifies common problems related to insufficient input water pressure.
Factors that can lead to the premature failure of the RO membrane.
Diagram identifying key points on the RO head for connection and diagnosis.
Steps to troubleshoot and eliminate humming noises in the RO system.
Solutions for when no water flows from the RO faucet.
Steps to take if the water flow rate from the faucet is slow.
Diagnosing why the system may not shut off promptly or completely.
Reasons for high TDS readings and how to test them.
Procedure to address leaks from the filter housings.
Steps to fix leaks at the tank ball valve connection.
Diagnosing why pure water might taste like tap water.
Explains the cause of air bubbles and how to remove them.
Instructions for installing the optional AirGap faucet.
Outlines conditions under which the product warranty will be invalidated.
To Next Page