Need help?Do you have a question about the Apec Water SOFTENER Series and is the answer not in the manual?
General| Operating Pressure | 20-80 PSI |
|---|---|
| Operating Temperature | 40-100°F |
| Type | Water Softener |
| Capacity | 32, 000 grains |
| Tank Material | Polyethylene |
| Resin Type | High Capacity Resin |
| Valve Type | Automatic |
Critical site requirements for installation, including water pressure, temperature, and electrical needs.
Details on connecting inlet/outlet plumbing, including shutoff valves and grounding straps.
Instructions for connecting the drain line, including flow control and anti-siphon traps.
How to connect the brine tank tubing to the brine valve.
Guidance on connecting an overflow line to prevent water damage.
Explanation of buttons (NEXT, REGEN, Δ, ∇) and their functions for control and settings.
Details on wiring specifications for relays and connections to the PC board.
Outlines the scope of the warranty for the water filtration product.
Explains the process and conditions for product repair or replacement under warranty.
Specifies the conditions that must be met for the limited product warranty to remain valid.
Lists defects and damages that are not covered by the product warranty.
Lists specific conditions that will void the product's limited warranty.
Covers general terms, disclaimers, and limitations of the product warranty.
Provides contact information and procedures for obtaining warranty service or making inquiries.
To Next Page