Need help?Do you have a question about the Apec Water FILTER-SET-CB2-20BB and is the answer not in the manual?
General| Filter Type | Carbon Block |
|---|---|
| Dimensions | 20 x 4.5 inches |
| Filtration System Type | Whole House |
| Filter Stages | 1 |
| Flow Rate | Up to 10 GPM |
| Filter Size | 20" x 4.5" |
| Compatibility | Compatible with standard 20" x 4.5" filter housings |
| Filter Life | 6-12 months |
| Filter Housing Material | Polypropylene |
| Inlet/Outlet Size | 1 inch |
| Micron Rating | 5 Micron |
This manual provides instructions for installing and operating the whole house water filter.
Key guidelines and prerequisites for installing and maintaining the water filter.
Important checks and precautions to take before beginning the installation process.
A brief overview of the installation process and key considerations.
Detailed instructions for attaching adapter fittings to the plumbing system.
Guidance on properly cutting the water line to accommodate the filter installation.
Procedure for connecting adapter fittings to the prepared water line.
Instructions for mounting and connecting the main filter unit.
Optional steps for grounding the unit, especially for copper or galvanized pipes.
Instructions for inserting the filter cartridge into the housing and closing it.
Outlines the conditions under which the limited product warranty is valid.
Lists defects or issues that are not covered by the product warranty.
Information on how to claim warranty service or contact APEC for general product questions.
To Next Page