Conditions of Validity of this Limited Product Warranty
Even though the Product has extremely high endurance for operating conditions such
as pH, maximum TDS, temperature, and optimum water pressure, THIS LIMITED
PRODUCT WARRANTY SHALL ONLY BE VALID IF:
1. The replaceable filters are changed and maintained on a regular basis as
directed in the Manual. Moreover, depending on local water input water quality,
regular maintenance may need to be increased.
2. The Product is operated within the confines of the following standard operating
conditions:
Water Pressure Water Temp.
10” & 20” Whole HouseWater Filter Max. 90 psi Max.100 F
Any information or suggestion by APEC with respect to the Product concerning appli-
cations, specifications or compliance with codes and standards is provided solely for
your convenient reference and is made without any representation as to accuracy or
suitability. You must verify and test the suitability of any information with respect to the
Product for your specific application.
Non-Covered Defects
THIS LIMITED PRODUCT WARRANTY DOES NOT COVER DEFECTS CAUSED BY:
1. Improper storage, installation, maintenance, handling, use and/or alterations of
the Product, including, but not limited to, non-compliance with the installation,
maintenance and standard operation conditions stated in the Manual and this
Limited Product Warranty.
2. Unreasonable use, unintended use, or misuse of the Product for something other
than its intended purpose.
3. Use of replacement parts, filters, or other accessories that are not sold or manu-
factured by APEC for use with this particular Product.
4. Damage not resulting from manufacturing defects that occur while the Product is
in the original purchaser’s possession.
5. Installation of the Product with known or visible manufacturing defects at the time
of installation.
6. Damage caused by freezing, flood, fire or Act of God.
14
To Next Page
Loading...
