Need help?Do you have a question about the Apeks AP5920 and is the answer not in the manual?
General| Brand | Apeks |
|---|---|
| Model | AP5920 |
| Category | Control Unit |
| Language | English |
Recommended placement for auto dump valve on the arm for easy operation by the opposite hand.
Placement of cuff dump valves near the suit cuff, ensuring they are not covered by gloves.
General chest area placement for inflation valves, ensuring accessibility and avoiding obstruction.
Recommendation to use a rubber backing patch for valve fitting to prevent leaks.
Fitting instructions for low profile auto dump valves, including critical cap pressing during tightening.
General fitting procedure for other suit valves, including swivel inflation valves.
Steps for operating inflation and auto dump valves, including buoyancy checks and ascent.
How to vent air using cuff dump valves by raising the arm and allowing air to escape.
Instructions for rinsing, cleaning, and annual servicing of suit inflation valves.
Procedures for rinsing dump valves and checking operation before each dive.
Recommended common areas for positioning the P-valve for easy access and operation.
Instructions for fitting the P-valve, including hole cutting, backing patch, and tightening.
How to open and close the P-valve using clockwise and anti-clockwise rotation.
Guidelines for rinsing the P-valve after each dive to maintain trouble-free use.
To Next Page