Need help?Do you have a question about the Apelco 460 and is the answer not in the manual?
General| Transducer Frequency | 200 kHz |
|---|---|
| Depth Range | 600 feet |
| Display | LCD |
| Beam Angle | 20 degrees |
| Battery | 12 VDC |
| Power Output | 150 watts (RMS) |
Overview of the FishFinder 460 system, its components, and basic functionality.
Instructions for unpacking the device and checking for all standard and optional equipment.
List of included standard components and their part numbers for the FishFinder 460.
List of optional accessories available for purchase to enhance FishFinder 460 functionality.
Definitions of key terms and nautical terminology used throughout the manual.
Step-by-step guide for mounting the FishFinder 460 display unit securely on a flat surface or flush.
Detailed instructions for flush mounting the display unit into a vessel's console using the optional kit.
Guidance on attaching, positioning, and mounting the transducer for optimal performance.
Specific advice on locating the transom transducer relative to the hull and propeller for best results.
Procedure for securely connecting the transducer to its mounting bracket assembly.
Steps for mounting the transducer bracket onto the vessel's hull, ensuring correct angle and alignment.
Instructions for adjusting the transducer's quick-release mechanism for safe operation and impact protection.
Guidance on properly routing the transducer and power cables, minimizing electrical interference.
Instructions for safely connecting the FishFinder 460 to the vessel's 12 VDC power system.
Explanation of the function of each button on the FishFinder 460's front panel.
Overview of the main menu, operating modes (FishFinder, Bottom Coverage, Navigation), and display features.
Detailed description of display settings, functions like Range, Sensitivity, Zoom, and Alarms.
How to access and navigate the Set-up menu to configure various operating conditions and preferences.
Detailed explanation of setting specific functions like Range, Sensitivity, and Contrast via the keypad.
Adjusting display contrast, chart speed for clarity, and the White Line feature for bottom distinction.
Utilizing Bottom Lock for clear seabed views and Zoom for magnified detail.
Configuring Shallow, Deep, and Fish Alarms, along with the alarm buzzer.
Procedure for calibrating temperature and speed readings for greater accuracy.
How to reset settings to defaults and use the simulator for practice.
Explanation of how echo sounders work, including ultrasonic beams and echo reception.
How to interpret different seabed types (hard, soft, rocks) based on display readings.
Diagrams illustrating the flow of data and modes within the FishFinder 460.
To Next Page
