Operation Instructions
1) Press " ", the screen display "P100".
2) Turn " " to adjust the hour figures, the input time should be
within 0--23.
3) Press " ", the minute figures will flash.
2) Turn " " to adjust 80% microwave power until the oven displays
"P 80".
3) Press " " to confirm, the screen displays "P 80".
4) Turn " " to adjust the cooking time untill the oven displays
"20:00".
5) Press " " to start cooking or press " "
to cancel the settings.
1. Clock Setting
When the microwave oven is electrified, the oven will display "0:00", buzzer will rings once.
1) Press " ", the hour figures will flash, and the indicator for
clock " " will light.
4) Turn " " to adjust the minute figures, the input time should
be within 0--59.
5) Press " " to finish clock setting. The indicator for clock
" " will go out, ":" will flash, and the time will light.
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
2. Cooking food
Press " " and turn " " to select the function you want. Press
" " and turn " " to select the cooking time. Press " "
to start cooking.
Example: If you want to use 80% microwave to cook food for 20 minutes, you can
operate the oven as the following steps.
Clock/ Pre-Set
Clock/ Pre-Set
Clock/ Pre-Set
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Micro./Grill/Combi.
Quick Start/Start
Cancel/Stop
Quick Start/Start
To Next Page
Loading...