In the process of video recording
1. The cam won't record after being turned on
Solution:
A: Confirm whether a TF card has been inserted. Check the format of the
card (Class 10, no bigger than 32GB)
B: Turn off the cam, remove the card and insert it again
C: Format the card on the cam
2. Abnormal video recording ending
Solution:
A: Format the card
B: Check whether the format of the memory card is correct
C: Change to a correct qualified card to see if it is a card failure
D: There are many poor memory cards in the market. The quality of these
cards is
bad and will affect the use of the cam
3. Screen goes black
Solution:
The screen will go black if there is no operation on the cam within the set
time interval even during recording. You can press any button to wake the
cam up.
4. Videos have no audio
Solution:
A: Check whether the audio recording is turned on. You can check it by
the microphone logo on the screen.
B: Check the volume of the sound. You can adjust the volume by the
up/down button on the left of the screen during recording
15
To Next Page
Loading...
