Aperia Technologies Halo - Safety; Safety Words and Symbols

Safety
SAFETY WORDS AND SYMBOLS
Please pay attention to special symbols used through this manual
to convey important information. Hazard signal words such
as WARNING, CAUTION, or NOTICE are used throughout this
manual. Information accented by these words indicates a point of
emphasis and importance. The following denitions comply with
ANSI Z535.6 and indicate the use of signal words as they appear
within this manual.
OTHER HELPFUL WORDS AND SYMBOLS
The following symbols are used throughout the manual to help
guide you in your work with the Halo Tire Inator.
VISUAL CHECK
SOUND CHECK
A sound check symbol describes a
critical noise that should be heard and
and accompanying instructions that
should be followed.
A visual check symbol describes a critical
observation that the user should see and
accompanying instructions that should be
followed.
This is the safety alert symbol. It is used to
alert you to potential physical injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.
WARNING indicates a hazardous situation
that, if not avoided, could result in serious
injury or death.
CAUTION indicates a hazardous situation
that, if not avoided, could result in minor or
moderate injuries.
NOTICE is used to address practices which
could result in damage to equipment or
property.
3