PacketWave Base Station and Subscriber
Outdoor Units Installation Instructions
July 2003 2 Rev 2.0
1. Base Station Unit Antenna Assembly and Mounting
Note: Down tilt assembly is an option.
Do not install near power lines. Power lines, telephone lines, and guy wires look the
same. Assume any wire or line can electrocute you.
Do not install on a wet or windy day or when lightening or thunder is in the area. Do
not use metal ladder.
Wear shoes with rubber soles and heels. Wear protective clothing including a long-
sleeved shirt and rubber gloves.
2.5” – 4.5”
(63 mm – 114 mm)
To Next Page
Loading...
Need help?
General