Need help?Do you have a question about the Aperto PacketWave 1000 Series and is the answer not in the manual?
General| Operating Range | Up to 30 miles (48 km) |
|---|---|
| Frequency | 5.8 GHz |
| Interface | 10/100 Ethernet |
| Operating Temperature | -40°C to +55°C |
| Humidity | 5% to 95% non-condensing |
| Product Type | Fixed Wireless Broadband Base Station |
Device compliance with FCC Part 15 rules.
Compliance for Class A digital device and interference mitigation.
Initial steps for planning, site preparation, and system configuration.
Steps for defining IP network parameters for the system.
Procedure for creating configuration files for Base Station Units.
Procedure for creating configuration files for Subscriber Units.
Steps to configure TFTP and DHCP servers for system operation.
High-level description of the PacketWave system architecture and components.
Detailed description of the PacketWave 1000 Base Station Unit.
Critical infrastructure for IP address assignment and configuration.
Critical infrastructure for configuration file distribution.
Primary tool for configuring base station and subscriber equipment.
Browser-based interface for monitoring and limited configuration.
Key planning aspect for wireless cell site setup.
Planning cell size and equipment based on capacity needs.
To Next Page
