Aperto PacketWave 1000 Series User Manual

2–19
070-20000340-01 Rev C1
Chapter 2. PacketWave System Overview
daylight savings time parameters which it applies to the received time and date as
appropriate.
NOTE: Alternatively, date and time can be set via the Web and SNMP interfaces.
Subscriber Units use the BSU as their time server.
DNS Server
The DHCP server should identify a DNS server to be used in the resolution of Internet
domain names.
SMTP Server
The PacketWave Base Station Unit can use E-mail to announce events. If this feature is to
be used, an SMTP (Simple Mail Transfer Protocol) server must be specified.
System Log Server (Syslog)
If a Syslog server is identified in the BSU configuration, the Base Station Unit will log all
events to the specified server using the standard Syslog protocol.
Syslog is needed to effectively monitor the PacketWave system. Service providers
should install this server in their network.
SNMP Manager
SNMP (Simple Network Management Protocol) is an industry standard for management of
computer networks. PacketWave Base Station Units and subscriber Indoor Units include
built-in SNMP agents. These agents can be accessed by SNMP managers as specified in
the system configuration.
NOTE: PacketWave SNMP agents use SNMP v.2 syntax for objects.

Aperto PacketWave 1000 Series Specifications

General

Brand	Aperto
Model	PacketWave 1000 Series
Category	Network Router
Language	English