What to do if the Power Limit LED is lit on my Apex Digital Portable Generator?
If the Power Limit LED is lit, it means the generator can't supply the requested power. To troubleshoot, disable the output and rear circuit breaker (if equipped). Inspect the unit’s RF output connector, output cable, tuner, and chamber.
Why is the RF ON LED flashing on my Apex Digital Portable Generator?
The RF ON LED might be flashing because the Apex unit is in User control mode and receiving an RF On command, or the output has been latched off due to a fault or interlock interrupt. Verify the User port and control mode setup. After clearing any fault or reestablishing the interlock, send an RF Off command to reset the indicators.
How to fix Overtemp LED if it is on solid on my Apex Digital Portable Generator?
If the Overtemp LED is solid, the internal cold plate temperature has exceeded the limit. Ensure the unit is receiving proper cooling as specified in the Coolant Specifications section.
What to do if the Interlock LED is not lit on my Apex Digital 5708009-C Portable Generator?
If the Interlock LED is not lit, it means the interlock is not satisfied or was interrupted. Make sure the RF output cover is firmly attached and ensure the interlock pins on the User port are satisfied.
What does it mean if the Overtemp LED is flashing on my Apex Digital Portable Generator?
If the Overtemp LED is flashing, it means the internal cold plate temperature is approaching the shutdown limit. Take precautions by ensuring that the unit is receiving proper cooling as outlined in the Cooling Specifications section.
What causes the E011 Low bus voltage limit error on my Apex Digital 5708009-C?
The E011 error means the bus voltage is too low. Send RF OFF command to reset the error code. Ensure that the input voltage is within the specified range.
What does E012 High bus voltage limit mean on my Apex Digital 5708009-C Portable Generator?
The E012 error indicates that the bus voltage is too high. Make sure your input voltage is within specification and send RF OFF command to reset the error code.
What causes the E029 Ripple Current Error on my Apex Digital Portable Generator?
The E029 error may be caused by a missing phase on the input line voltage or an unstable plasma. Verify that all three phases are present on the input voltage lines and that the plasma is stable.
What to do if I see E020 User interlock open on my Apex Digital 5708009-C?
The E020 error indicates that the interlock is not satisfied or was interrupted. Make sure that the RF output cover is firmly attached and ensure the interlock pins on the User port are satisfied.
Why is the AC On LED not lit on my Apex Digital 5708009-C?
The AC On LED might not be lit due to an external line fault. Check the input voltage and circuit breaker specifications. After correcting, send an RF Off command to reset the unit.
General| Brand | Apex Digital |
|---|---|
| Model | 5708009-C |
| Category | Portable Generator |
| Language | English |
Provides instructions on locating applicable manual information for your Apex unit.
Details critical safety precautions for operating and maintaining the Apex generator.
Outlines essential criteria for the proper installation of the Apex generator.
Provides an overview of the Apex product line and its configurable features.
Explains the generator's functions like regulation, cooling, and interlocks.
Lists the physical dimensions, weight, and packaging options for the Apex generator.
Details input power, output power, and other electrical characteristics of the Apex generator.
Outlines the requirements for water cooling, including temperature, flow rate, and pressure.
Describes the different User port configurations and their pin assignments.
Details the available Host port interfaces like RS-232, Profibus, and DeviceNet.
Explains the meaning and function of various status indicators (LEDs) on the Apex generator.
Guides through the process of unpacking, grounding, and preparing the generator for installation.
Explains how to connect the output power, including available connector options.
Provides instructions for initial setup and verification of the Apex generator's operation.
Offers a systematic approach to diagnosing and resolving operational issues with the Apex generator.
Lists and explains error codes, their meanings, and suggested solutions for the Apex generator.
Provides contact information for global support offices for assistance with the Apex generator.
Outlines the terms and conditions of the warranty for Advanced Energy products.
To Next Page