What to do if my Apex Digital AT1302, AT 2002, AT2402, AT2702 CRT TV has no power?
If your Apex Digital CRT TV has no power, ensure the power plug is securely connected to the wall outlet. Also, verify the connection from the DVD/VCR video output to the TV video input is secure, and confirm the coaxial cable from the antenna is connected to RF IN.
Why is there no sound on my Apex Digital AT1302, AT 2002, AT2402, AT2702?
If there is no sound on your Apex Digital CRT TV, make sure the audio cables are securely connected to the terminals. Also, verify the connection from the DVD/VCR audio output to the TV audio input and switch to the appropriate mode on the receiver. Check if the mute feature is enabled.
What to do if my Apex Digital AT1302, AT 2002, AT2402, AT2702 has no picture?
If your Apex Digital CRT TV shows no picture, verify the connection from the DVD/VCR video output to the TV video input is secure. Then, switch the TV to the appropriate video mode. Also, make sure the coaxial cable from the antenna is connected to RF IN.
What to do if my Apex Digital AT1302, AT 2002, AT2402, AT2702 CRT TV remote control doesn't operate?
If the remote control for your Apex Digital CRT TV isn't working, replace the batteries, as they may be weak. Also, ensure that the remote sensor is not blocked, including any deflection from a curved glass cabinet.
What to do if my Apex Digital CRT TV has no TV signal?
If your Apex Digital CRT TV is not receiving a TV signal: * Check whether your receiver is set to the TV mode. * Check whether the antenna is well connected to the TV receiver. * Unplug the TV from the wall for 30 seconds, then plug it in and try again. * Unplug the antenna connection from the back of the TV, unplug the TV from the wall, wait 30 seconds, then try again.
Why is my Apex Digital AT1302, AT 2002, AT2402, AT2702 channel not received?
If your Apex Digital CRT TV is not receiving a channel, make sure the Air/Cable setting is correct. Also, check the Add/Erase feature, as the channel may have been erased during setup, or the channel may be locked with the block channel feature, such as Parental Control.
Why does my Apex Digital AT1302, AT 2002, AT2402, AT2702 CRT TV picture become snowy?
If the picture on your Apex Digital CRT TV becomes snowy, check the antenna lead wire to see if it has an open circuit. Also, check the connection of the antenna lead wire to the TV set input and whether there is any damage to the antenna.
What causes stripe or purple interference to appear on the screen of Apex Digital CRT TV?
Stripe or purple interference on your Apex Digital CRT TV screen may be due to interference from high-frequency sources such as a broadcasting station, a poor ground connection in the cable used, or non-shielded audio speakers too close to the picture tube.
What causes a picture with multi-image on Apex Digital AT1302, AT 2002, AT2402, AT2702 CRT TV?
If your Apex Digital CRT TV displays a picture with multi-image, it may be because the video frequency radiated from the TV station is being reflected by tall buildings or high towers. Change the direction of the antenna to minimize the multi-image.
What causes a black box to appear on the screen of Apex Digital CRT TV?
A black box appearing on the screen of your Apex Digital CRT TV may be due to the Closed Caption to Text feature being active.
General| Brand | Apex Digital |
|---|---|
| Model | AT1302, AT 2002, AT2402, AT2702 |
| Category | CRT TV |
| Language | English |
Essential safety guidelines for using the television set safely, including warnings and precautions.
Information regarding FCC compliance for Class B Digital Devices and potential radio frequency interference.
Detailed explanations of the TV's various features and capabilities, presented in a table format.
Diagrams and descriptions of front, rear, and side panel controls for specific TV models (AT1302, AT2002, etc.).
Explanation of all buttons and their functions on the remote control for operating the television.
Instructions and recommendations for connecting an antenna for optimal TV reception.
Guidance on connecting external audio/video devices like VCRs and DVD players to the TV.
Covers powering the TV on/off, screen display modes, channel changing, volume, and mute functions.
Instructions for accessing and adjusting Picture Menu and Tuner Menu settings.
How to set the clock, program the timer for TV On/Off, and set specific channels.
Adjusting on-screen display language, blue background, and closed captioning settings.
Setting parental guide, understanding TV/MPAA ratings, and managing pass codes.
Explains additional remote control features like Scan, Picture Modes, Recall, and Child Lock.
To Next Page