APEX DIGITALHT-170
11
1. Press the STANDBY/ON button on the front panel.
The power indicator lights up in green, the unit turns on.
2. Press the OPEN/CLOSE button.
This will open the disc tray.
3. Place the disc on the disc tray.
HOW TO PLAYBACK A DISC.
ck
How to playback DVD video discs.
• Turn on the TV and select the video input source which is connected to the unit.
Playing Back a Disc
Basic Playback
Be sure the playback side is faced down.
4. Press the OPEN/CLOSE button again.
After closing the disc tray, playback will start.
• A disc may be damaged if not correctly
placed on the guides in the disc tray. This
may also cause the unit to malfunction.
• The menu screen will appear automatically
or you may access the menu screen by
pressing the TITLE button.
!
!
AFF Function
Before AFF
After AFF
WHAT IS AFF?
AFF stands for Active Full-screen Function. It allows you to fill the television screen viewing area when using a
wide screen formatted DVD. Press the AFF button on your remote control,this will eliminate black bars on the
top & bottom of the TV screen when viewing movies with an aspect ratio of 1.85:1 and minimize (but not elim-
inate) black bars on movies with a wider aspect ratio (2.35:1).
• When the unit enters into standby mode, the
indicator turns to red.
!
NOTICE:
• Moving the unit during playback may cause damage to the disc as well as player.
• To open and close the disc tray, you may only use the OPEN/CLOSE button on the remote control or the unit.
To Next Page
Loading...