Remote Control
Your remote control handset is powered by two (2) AAA type batteries
• To insert batteries, turn the remote
control over and remove the battery
cover.
•
To avoid damage from possible battery chemical leakage, remove the batteries if you do
not plan to use the remote control handset for an extened period of time.Do not mix bat-
teries of different age and or type. Always discard used batteries safely.
•
Do not expose remote control to liquids, direct sunlight or sources of excessive heat.•
The IR receiver will not work properly if TV is in direct sunlight, the remote control is •
pointed off-axis or an object is in the IR path.
• Place two (2) AAA batteries into the
compartment with correct polarity.
• Replace the cover.
NOTE: Improper use of batteries can result in a chemical leakage or explosion.
Battery Install
6
30° 30°
IR Receiver
When pointed towards the television, the effective rang is approximately 16 feet from the
front of the IR receiver, 30
o
to the left and right, 20
o
up and down.
To Next Page
Loading...