16
sgnitteS edoM VT
16
draziW puteS laitinI
The wizard will direct you to the TV menu to select antenna options and run
Channel Auto Scan. Channels found will be stored in the TV tuner memory.
How to Navigate:
Press the • arrow button to highlight CABLE or AIR based on your an-
tenna connection.
Press the • arrow button to select Auto Scan and press ENTER (When
Cable is selected, ‘AUTO’ is recommended). Otherwise, press the arrow
button to select STD > IRC > HRC > Auto
Highlight• Start to Scan and press ENTER.
Channel Auto Scan• may take several minutes to complete.
Initial Setup Wizard
After connecting your TV antenna or cable wire, turn the television ON. A quick setup wizard
will display on-screen for selecting your preferred picture setting followed by antenna op-
tions and performing Auto Scan to receive local broadcast channels that will be stored in the
TV tuner memory.
In Home Mode, the television display meets Energy Star standards to reduce
power consumption.
In Retail Mode, the television provides a more dynamic picture that will increase
power consumption beyond Energy Star standards.
To Next Page
Loading...
