puteS VT
puteS lennahC VT
nacS otuA lennahC &
17
Select antenna options and run Auto Channel Scan to receive television channels.
To enter TV Mode:
Press the • MENU button
Using the • arrow buttons; scroll to highlight TV mode
Press the down • arrow button to highlight CABLE or AIR
Select AIR when connected
to an indoor/outdoor
antenna.
• Press the arrow
button to highlight AIR
• Press the down arrow
button to select Auto Scan
then press the right arrow
button twice to start Chan-
nel Auto Scan.
• Channel Auto Scan may
take several minutes to
complete.
Select CABLE if you subscribe
to a pay television service includ-
ing satellite.
• Using the arrow button to
highlight CABLE
• Press the arrow button
to select AUTO SCAN. Press
ENTER and the cursor will move
up and CABLE SYSTEM will be
displayed next.
• Press the arrow button to
select STD > IRC > HRC > Auto
(Auto is recommended).
• Press the down arrow button
to select Auto Scan and press
ENTER.
• Channel Auto Scan may take
several minutes to complete.
NOTE: For cable or satellite
users without an indoor/
outdoor TV antenna, there is
no need to run Channel Auto
Scan. Connect your cable or
satellite set top box to one of
the available inputs on the TV
for viewing. See pages 11-13
for connection details.
To Next Page
Loading...
